EKSPERIMEN GAYA GESEK UNTUK MENGUJI NILAI KOEFISIEN GESEKAN STATIS KAYU PADA KAYU DENGAN PROGRAM MATLAB

Puji Hariati Winingsih, Hidayati Hidayati

Sari


This study aims at designing tools to test the coefficient of static timber friction on wood through friction force experiments. Crafting force experiments have been developed to determine the coefficient of static timber friction coefficient on wood. The data was collected 10 times each mass variation and obtained friction force data (fs). The data analysis used a weighted linear regression with REGLIN program written in Matlab and chisquere test. The results obtained by the form of coefficients of linear function are a0 = 0.309 and a1 = 1.937 with ralat (Sμ = 0.010). The amount of coefficient of static friction (μs) of wood on wood using Matlab is μs = (0.402 ± 0.010). This result is in accordance with the theory that μs = 0.40. The chisqure test (χ2) shows that there is a linear correlation between fs and m, with an opportunity value P () = 50.56%, so the data in this experiment is acceptable. 


Kata Kunci


experiment, static friction coefficient, wood, Matlab

Teks Lengkap:

PDF

Refbacks

  • Saat ini tidak ada refbacks.


_____________________________________________

Science Tech: Jurnal Ilmu Pengetahuan dan Teknologi

ISSN 2460-6286 (Print)

ISSN 2579-3624 (online)

 

 Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.

View My Stats