Peningkatan Prestasi Belajar Melalui Penerapan Model Pembelajaran Langsung Pada Pembelajaran Mesin Milling CNC

Bambang Suyanto

Sari


The research purpose of  this study is improve student learning outcomes. To study the response of learners to apply direct instruction model (DI). To determine the activity of students during the learning process takes place. This study applied milling machine CNC majors of SMKN 1 Cirebon on the topic the program milling machine CNC. The object of this study was student class XII PM1 year 2016/2017which consists of 34 students. The kind of this research is Classroom Action Research which consists of several cycles refers to completeness criteria specified. When the cycle of first step is can not obtained a value corresponding to the criteria of completeness, the cycle will continue until the obtained results are in accordance with the criteria of completeness. Each cycle has stages, planning, action, observation and reflection. Data obtained from this study were collected and analyzed qualitative description, while the instruments used in this study include the observation sheet learner activity, achievement test sheets, questionnaires learners. The results of this study are the application of direct instruction model on topic charging system using the program milling machine CNC courses, learning outcomes increasing student mastery criteria for achieving a grade of 75 (B+). This is indicated by the increasing learning outcomes in the first cycle is only one study that reached mastery criteria but on the second cycle all learners have achieved the final learning criteria score ≥ 75 (B+) and the activity of the learner's mean score = 86,77 to 97,22 , despite of the fact that the response decreased firstly learners first cycle with an average percentage of 79,99 % decreased to 77,64 %.


Kata Kunci


Direct Instruction, learning outcomes.

Teks Lengkap:

PDF

Referensi


DAFTAR PUSTAKA

Suharmi Arikunto, dkk. 2009. Penelitian Tindakan Kelas. Jakarta: Bumi Aksara.

Wiriaatmadja, Rochiati. 2010. Metode Penelitian Tindakan Kelas. Bandung: Rosdakarya.

Ardani, Richo. 2005. Penerapan Pengajaran Langsung Pada Materi Elemen Mesin Terhadap Prestasi Belajar Mahasiswa Jurusan Pendidikan Teknik Mesin Unesa. Surabaya: Universitas Negeri Surabaya.

Suyono dan Hariyanto, 2011. Belajar Dan Pembelajaran. Bandung:PT Remaja Rosdakarya

Sudjana,Nana. Penilaian Hasil Belajar Mengajar. Bandung: Raja Rosakarya, 2005

Hamzah B. Uno. 2006. Model Pembelajaran Menciptakan Proses Belajar Mengajar yang Kreatif dan Efektif, Jakarta, Bumi Aksara.

Lilih Dwi Priyanto, ,2007, Mesin Milling CNC TU-3A . BLPT Surabaya.

Darmanto Joko, 2007, CNC Milling Modul. Surakarta ; Yudhistira.

Direktorat Pembinaan Sekolah Menengah Atas. 2008.

Penetapan Kriteria Ketuntasan Minimal (KKM). Jakarta: Departemen Pendidikan Nasional.

Yayat. (2010). Implementasi Rencana Program Pembelajaran Berbasis Kompetensi pada Pembelajaran Kompetensi Dasar Menulis Program CNC. Jurnal Penelitian Pendidikan VI.




DOI: http://dx.doi.org/10.30738/wa.v3i2.5986

Article Metrics

Sari view : 83 times
PDF - 23 times

Refbacks

  • Saat ini tidak ada refbacks.


##submission.copyrightStatement##

##submission.license.cc.by-sa4.footer##

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.