Pengukuran Kinerja Green Supply Chain Management (GSCM) Menggunakan OMAX dan Pendekatan PDCA pada PT. Putra Multi Cipta Teknikindo

Authors

  • Kent F. R. Temenggung Zees Institut Sains & Teknologi AKPRIND Yogyakarta, Indonesia
  • Cyrilla Indri Parwati Institut Sains & Teknologi AKPRIND Yogyakarta, Indonesia
  • Andrean Emaputra Institut Sains & Teknologi AKPRIND Yogyakarta, Indonesia

DOI:

https://doi.org/10.30738/iejst.v6i1.12823

Keywords:

Analytical Network Process, Green Supply Chain Management, Objective Matrix, Performance Measurement, Plan Do Check Action

Abstract

In industrial sector activities, supply chain processes involve extracting and exploiting natural resources that may hurt the environment. Based on this, an approach to supply chains that is more environmentally friendly is needed. Green supply chain management (GSCM) integrates environmental thinking into supply chain management, including product design, material sourcing and selection, manufacturing processes, final delivery of products to consumers, and end-of-life management after the last utilization period. PT. Putra Multi Cipta Teknikindo is a company engaged in the trade of goods and services. Trade in goods and services includes batik stoves, small industrial production machines, industrial and laboratory scale measuring and detection equipment, and batik workshops. The purpose of this study is to measure the performance of GSCM in PT. PMC Teknikindo. This research is expected to provide information on the company's performance conditions in applying GSCM. The company is expected to be responsive to this performance measurement to increase the performance of related indicators so that there is continuous improvement. GSCM performance measurement uses the Plan, Do, Check, Action (PDCA) approach with Analytical Network Process (ANP), Objective Matrix (OMAX), and Traffic Light System (TSL) methods. The results of this study are the total KPI value of 4,867 which means the GSCM performance of PT. PMC Teknikindo has not reached the target. The results of the performance measurement indicators contained 26 KPIs in the yellow category, 5 KPIs in the red category, and 1 KPI in the green category. Based on these results, it is necessary to recommend improvements to related indicators to optimize achievement.

References

A. Susanty, H. Santosa dan F. Tania, “Penilaian Implementasi Green Supply Chain Management di UKM Batik Pekalongan dengan Pendekatan GreenSCOR,” Jurnal Ilmiah Teknik Industri, vol. 16, no. 1, pp. 56-64, 2017.

S. K. Srivastava, “Green supply-chain management: A state-of-the-art literature review,” International Journal of Management Reviews, vol. 9, no. 1, pp. 53-80, 2007.

M. A. V. P. Putri, “Analisis Penilaian Kinerja dengan Menggunakan Metode Balanced Scorecard (Studi Kasus di RSUD Sleman),” Program Studi Akuntansi, Fakultas Ekonomi, Universitas Sanata Dharma, Yogyakarta, 2017.

R. S. Kaplan dan D. P. Norton, Balanced Scorecard: Menerapkan Strategi Menjadi Aksi, Jakarta: Erlangga, 2000.

F. Muliyawati, “Pengaruh Budaya Kinerja Kaizen terhadap Kinerja Karyawan PT. Gistex Garmen Indonesia,” Program Studi Manajemen, Fakultas Bisnis dan Manajemen, Universitas Widyatama, Bandung, 2015.

E. W. Yunitasari, “Perbaikan Sistem Belajar Mahasiswa pada Mata Kuliah Statistik Industri dengan Metode Plan Do Check Action (PDCA),” INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA, vol. 3, no. 2, pp. 64-76, 2019.

I. Sodikin, P. Wisnubroto dan N. M. Ayunin, “Pengukuran Kinerja Perusahaan Menggunakan Strategic Management Analysis and Reporting Technique (SMART) System di PT Telkom Witel Magelang,” INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA, vol. 1, no. 1, pp. 09-16, 2017.

I. Sodikin, M. Yusuf dan R. Pangestu, “Perancangan Pengukuran Kinerja Perusahaan Menggunakan Metode Sink's and Tuttle Model dan Integrated Performance Measurement Systems (IPMS),” INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA, vol. 4, no. 2, pp. 55-62, 2020.

A. T. Bintarti, “Pengukuran Kinerja Perusahaan dengan Menggunakan Metode Performanceprism pada PT Tunas Dwipa Matra,” Nominal: Barometer Riset Akuntansi dan Manajemen, vol. 1, no. 1, pp. 12-14, 2012.

Q. Zhu dan J. Sarkis, “Relationships between operational practices and performance among early adopters of green supply chain management practices in Chinese manufacturing enterprises,” Journal of Operations Management, vol. 22, no. 3, pp. 265-289, 2004.

C. Ninlawan, P. Seksan, K. Tossapol dan W. Pilada, “The Implementation of Green Supply Chain Management Practices in Electronics Industry,” dalam Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, Hongkong, 2010.

M. N. Nasution, Manajemen Mutu Terpadu (Total Quality Management), Edisi Kedua, Bogor: Ghalia Indonesia, 2005.

K. A. Suryadi, “Analisis Produktivitas Karyawan pada CV. Multi Karya Prima dengan Metode Objective Matrix (OMAX),” Jurusan Teknik Industri, Fakultas Sains dan Teknologi, Universitas Islam Negeri Sultan Syarif Kasim Riau, Pekanbaru, 2014.

T. L. Saaty, Decision Making for Leaders: The Analytic Hierarchy Process for Decisions in a Complex World, Third Edition, Pennsylvania, USA: RWS Publications, 2001.

A. N. Cahyawati, P. Pratikno dan R. Soenoko, “Analisis Pengukuran Kinerja Rumah Sakit dengan Menggunakan Metode Performance Prism,” Journal of Engineering and Management in Industrial System, vol. 1, no. 1, pp. 1-7, 2013.

Published

30-06-2022

How to Cite

Zees, K. F. R. T., Parwati, C. I., & Emaputra, A. (2022). Pengukuran Kinerja Green Supply Chain Management (GSCM) Menggunakan OMAX dan Pendekatan PDCA pada PT. Putra Multi Cipta Teknikindo. IEJST (Industrial Engineering Journal of the University of Sarjanawiyata Tamansiswa), 6(1), 1–9. https://doi.org/10.30738/iejst.v6i1.12823

Issue

Section

Artikel

Citation Check