Analisis Postur Kerja Operator Pengecatan dalam Rangka Meminimalisir Dampak Gangguan Muskuloskeletal
DOI:
https://doi.org/10.30738/iejst.v6i1.13083Keywords:
OWAS, RULA, REBA, Painting operator, Musculoskeletal disordersAbstract
The painting operator activity is done manually. This painting activity is carried out in a specific position and is carried out continuously, causing musculoskeletal disorders. This study aims to determine the working posture of the painting operator using the OWAS, RULA, and REBA methods. Data collection was carried out by distributing Nordic Body Map questionnaires to operators with several complaints. OWAS and RULA methods were used to find and analyze operator behavior that could cause musculoskeletal disorders and injuries. The results of the OWAS calculation show that the risk level score is 2. At the same time, the RULA risk level score is 3. The analysis results show that several operator postures pose a musculoskeletal risk, so improvements must be made. Hopefully, this proposed improvement will help reduce the risk of musculoskeletal injuries
References
M. N. Fauziyah, N. Romadhona and M. A. Djojosugito, "Gambaran Pola Penyakit pada Pekerja dalam Melakukan Upaya Awal Pengawasan Penyakit Akibat Kerja," Prosiding Pendidikan Dokter, vol. 5, no. 1, pp. 128-134, 2019.
R. Widiastuti, P. E. Prasetyo and M. Erwinda, "Identifikasi Bahaya dan Penilaian Risiko untuk Mengendalikan Risiko Bahaya di UPT Laboratorium Terpadu Universitas Sarjanawiyata Tamansiswa," INDUSTRIAL ENGINEERING JOURNAL of THE UNIVERSITY of SARJANAWIYATA TAMANSISWA (IEJST), vol. 3, no. 2, pp. 51-63, 2019.
D. T. Rezalti and A. E. Susetyo, "Kadar Suhu dan kelembaban di Ruang Produksi Wedang Uwuh Universitas Sarjanawiyata Tamansiswa," INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA (IEJST), vol. 4, no. 2, pp. 70-78, 2020.
R. Damayanti, N. Nurlaela and S. Usman, "Pengaruh Keselamatan Kerja dan Kesehatan Kerja terhadap Kinerja Karyawan PT Pulau Lemon Manokwari," Prosiding Seminar Nasional Manajemen dan Bisnis ke-3 Universitas Jember, p. 351365, 2019.
P. H. Nisansha, L. D. Fathimahhayati and M. E. Isharyani, "Analisis Permasalahan Ergonomi di Workshop CV. Prawa Karsa dengan Menggunakan Metode Ergonomic Checkpoint," INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA (IEJST), vol. 3, no. 1, pp. 1-12, 2019.
K. D. Odi, S. L. Purimahua and L. P. Ruliati, "Hubungan Sikap Kerja, Pencahayaan dan Suhu terhadap Kelelahan Kerja dan Kelelahan Mata pada Penjahit di Kampung Solor Kupang 2017," Jurnal Ilmu Kesehatan Masyarakat, vol. 14, no. 1, pp. 65-76, 2018.
A. A. S. Hardima, L. D. Fathimahhayati and F. D. Sitania, "Analisis Postur Kerja dan Redesign Peralatan Kerja untuk Mengurangi Risiko Musculoskeletal Disorders pada Pekerja Pelubangan Plastik Tempe (Studi Kasus: UKM Oki Tempe Samarinda, Kalimantan Timur)," INDUSTRIAL ENGINEERING JOURNAL of the UNIVERSITY of SARJANAWIYATA TAMANSISWA (IEJST), vol. 2, no. 1, pp. 7-26, 2018.
A. N. Bintang and S. K. Dewi, "Analisa Postur Kerja Menggunakan Metode OWAS dan RULA," Jurnal Teknik Industri, vol. 18, no. 1, pp. 43-54, 2017.
Z. F. Hunusalela, S. Perdana and G. K. Dewanti, "Analisis Postur Kerja Operator dengan Metode RULA dan REBA di Juragan Konveksi Jakarta," IKRAITH-Teknologi, vol. 6, no. 1, pp. 1-10, 2022.
E. B. T. Atmojo, "Analisis Nordic Body Map terhadap Proses Pekerjaan Penjemuran Kopi oleh Petani Kopi," Jurnal Valtech, vol. 3, no. 1, pp. 30-33, 2020.
A. Setiorini, "OWAS (Ovako Work Analysis System)," Jurnal Kedokteran Universitas Lampung, vol. 4, no. 2, pp. 197-204, 2020.
I. Pegiardi, F. S. Handika and S. Supriyadi, "Analisis Postur Kerja Operator dengan Metode Rula di Area Gas Cutting," Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 3, no. 2, pp. 73-77, 2017.
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Copyright (c) 2022 Muhammad Yusuf, Cyrilla Indri Parwati

This work is licensed under a Creative Commons Attribution 4.0 International License.