DESIGN OF AUTOMATIC GUITAR TUNER WITH THE OPEN TUNING METHOD BASED ON A SINGLE BOARD MICROCONTROLLER

Authors

  • Adlan Bagus Pradana Universitas Gadjah Mada, Indonesia
  • Achmad Dian Ramadhan Universitas Gadjah Mada, Indonesia
  • Aldila Fajar Rizkiana Universitas Gadjah Mada, Indonesia
  • Jimmy Trio Putra Universitas Gadjah Mada, Indonesia

DOI:

https://doi.org/10.30738/st.vol7.no2.a10296

Keywords:

Guitar, Tuning, Op-Amp, Arduino

Abstract

The guitar is a popular musical instrument by many people. Besides being able to be used as entertainment, playing music, one of which is the guitar, can also be used to train concentration. In playing the guitar, the sound of the guitar strings that match the harmony chord is the main key so that when playing the song it sounds harmonious. Of course this is related to the tuning process or the tuning process. Many people can play the guitar, but many of them have difficulty in tuning. Most people do the tuning manually. This of course will take a long time to produce an accurate tone.With the rapid development of technology, this problem can be solved with an automatic guitar tuner based on a single board microcontroller using the open tuning method. The design of this automatic guitar tuner uses 7 constituent components, namely a single board microcontroller (Arduino UNO), servo motor, Op-Amp, LED, LCD, push button, and acrylic. The tuning process is done by selecting the guitar strings to be tuned. Then, when the guitar is picked, the frequency will be amplified by the Op-Amp. After that, arduino will initialize the frequency and give a signal to the servo motor. The servo motor will perform the tuning process which will later display the results on the LCD. While the LED functions as a tuning indicator. Acrylic serves as a place to put components.

Downloads

Download data is not yet available.

References

Branta, A. G., Martins, E. M., Quandt, V. I., & Valente, S. A. (2019). Development of A Triple Input Musical Instrument Tuner Using Yin Algorithm. International Journal of Advanced Engineering Research and Science, 6495(12), 380–384.

Deo Kumar, B., Kushwaha, A., Kumar, A., & Agarwal, A. (2021). Design & Implementation of Digital Guitar Tuner Using MATLAB. 2021 International Conference on Advance Computing and Innovative Technologies in Engineering, ICACITE 2021. https://doi.org/10.1109/ICACITE51222.2021.9404728.

Firdaus Noor Abdillah. (2017). Implementasi Algoritma Fast Fourier Transform (Fft) dan Algoritma Harmonic Product Spectrum (HPS) pada Tuner Gitar Berbasis Android Firdaus Noor Abdillah Fakultas Ilmu Komputer Universitas Kuningan Jalan Tjut Nyak Dhien Cijoho Kuningan Telepon ( 0232. Jurnal Nuansa Informatika, 11(2), 18–25.

Murphy, J., Mathews, P., & Kapur, A. (2014). Robot : Tune Yourself ! Automatic Tuning in Musical Robotics. Proceedings of the International Conference on New Interfaces for Musical Expression, 565–568.

Nasution, R. Y., Putri, H., & Hariyani, Y. S. (2015). Otomatis dengan Penggerak Motor Servo Berbasis Design and Implementation of Automatic Guitar. Jurnal Elektro Telekomunikasi Terapan, 83–94.

Priatama, D. M., Wijayanto, I., & Susatio, E. (2016). Perancangan dan Implementasi Tuner Gitar Berbasis Fast Fourier Transform Pada Platform IOS Design and Implementation of Guitar Tuner Based on Fast Fourier. E-Proceeding of Engineering, 3(2), 1795–1802.

R, M. L., & Saji, A. K. (2009). A Digital Guitar Tuner. (IJCSIS) International Journal of Computer Science and Information Security, 6(2), 82–88.

Salcedo, J. S., Mart, D., & Ruano, I. R. (2019). Design and Development of A Low Cost Automatic Stringed Instrument Tuner. Jornadas de Automática, 604–610.

Å arga, P., & DemeÄko, D. (2017). Design and Realization of the Guitar Tuner Using MyRIO. Journal of Automation and Control, 5(2), 41–45. https://doi.org/10.12691/automation-5-2-2.

Stange, K., Wick, C., & Hinrichsen, H. (2021). Playing Music in Just Intonation: A Dynamically Adaptive Tuning Scheme. Computer Music Journal, July, 47–62. https://doi.org/10.1162/COMJ.

Downloads

Published

28-07-2021

How to Cite

Pradana, A. B., Ramadhan, A. D., Aldila Fajar, & Putra, J. T. (2021). DESIGN OF AUTOMATIC GUITAR TUNER WITH THE OPEN TUNING METHOD BASED ON A SINGLE BOARD MICROCONTROLLER. Science Tech: Jurnal Ilmu Pengetahuan Dan Teknologi, 7(2), 67–77. https://doi.org/10.30738/st.vol7.no2.a10296

Issue

Vol. 7 No. 2 (2021): August

Section

Artikel

Citation Check

License

Copyright (c) 2021 Adlan Bagus Pradana, Achmad Dian Ramadhan, Aldila Fajar Rizkiana, Jimmy Trio Putra

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:
  • The author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • The author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  • The author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).