E-module development of lathe machinery engineering mechanical engineering expertise program

Authors

  • Hero Purnomo Universitas Sarjanawiyata Tamansiswa, Indonesia
  • Suparmin Suparmin Universitas Sarjanawiyata Tamansiswa, Indonesia
  • Setuju Setuju Universitas Sarjanawiyata Tamansiswa, Indonesia
  • Hasnul Azwan bin Azizan Universiti Teknologi MARA, Malaysia
  • Muh Rafiq Alghozali The University of Southampton, United Kingdom

DOI:

https://doi.org/10.30738/jtvok.v10i2.13585

Keywords:

E-module, development, mechanical engineering, expertise program

Abstract

The research objectives were to: (1) Describe the process of developing e-module lathe machining techniques for class XI SMK. (2) Knowing the feasibility of e-module lathe machining techniques class XI SMK. This research includes a mixed type of qualitative and quantitative research called research and development (Research and Development). The development of this teaching material uses the 4D research and development model which consists of the define  , design  , development and dissemination . The subjects in this study consisted of material experts and media experts, namely PVTM UST Yogyakarta study program lecturers, as well as class XI students majoring in Mechanical Engineering SMK as users of the developed learning media. Data collection techniques using Google Forms and observation. Data analysis techniques use qualitative and quantitative descriptive approaches. (3) The results of this study are e-modules/electronic modules for lathe machining techniques. The e-module was declared good for use based on due diligence according to material experts with a total percentage of 79.7%, media experts with a total percentage of 77.9%, small group test results with a total percentage of 79.6% and large group trials with a total percentage of 83.6%. (4) Based on these data, the class XI lathe machining technique e-module is very suitable for use in learning.

References

Astuti, M., Arifin, Z., Mutohhari, F., & Nurtanto, M. (2021). Competency of Digital Technology: The Maturity Levels of Teachers and Students in Vocational Education in Indonesia. Journal of Education Technology, 5(2), 254–262. https://doi.org/10.23887/jet.v5i3.35108

Bambang Sudarsono, Santosa, B., & Sofyan, H. (2021). Improving The Competency of Automotive Vocational Teachers with Partnership-Based Training Model (PBK). JTP - Jurnal Teknologi Pendidikan. https://doi.org/10.21009/jtp.v22i3.18690

Choi, S., Jeong, J., & Kim, S. (2019). Impact of vocational education and training on adult skills and employment: An applied multilevel analysis. J, 66. https://doi.org/10.1016/j.ijedudev.2018.09.007

Firman, & Rahman, S. R. (2020). Pembelajaran Online di Tengah Pandemi Covid-19 Firman1, Sari Rahayu Rahman1. Indonesian Journal of Educational Science (IJES), 2(2), 81–89.

Gamizar Naufal Rafif, Hamidillah Ajie, & Yuliatri Sastrawijaya. (2021). PENGEMBANGAN VIDEO PEMBELAJARAN BERBASIS MOTION GRAPHIC PADA MATA PELAJARAN DDG UNTUK PESERTA DIDIK DI SMK PROGRAM KEAHLIAN MULTIMEDIA. PINTER : Jurnal Pendidikan Teknik Informatika Dan Komputer. https://doi.org/10.21009/pinter.5.2.6

Handoyono, N. A., & Rabiman, R. (2020). Development of android-based learning application in EFI materials for vocational schools. Journal of Physics: Conference Series, 1–8. https://doi.org/10.1088/1742-6596/1456/1/012050

Lee, J., Park, J. C., Jung, D., Suh, C. W., & Henning, M. A. (2021). Video learning strategies affecting achievement, learning approach, and lifelong learning in a flipped periodontology course. Journal of Dental Education. https://doi.org/10.1002/jdd.12572

Mad Noor Madjapuni, J. H. (2019). Kemahiran Berfikir Kritis Melalui Permainan Digital Dalam Persekitaran Pembelajaran Konstruktivisme Sosial. International Journal of Education, Psychology and Counseling.

Mandalika, I., Sukardi, & Minghat, A. (2018). Characteristics of electricity competency test at vocational high school. J, 7(4). https://doi.org/10.14419/ijet.v7i4.33.23519

Otchia, C. S., & Yamada, S. (2021). Interactions between vocational and attitudinal skills in labour market outcomes: findings from the skills’ assessment of garment factory workers in Ethiopia. Journal of Vocational Education and Training. https://doi.org/10.1080/13636820.2019.1652675

Prasojo, L. D., Mukminin, A., Habibi, A., Marzulina, L., Sirozi, M., & Harto, K. (2018). Learning to teach in a digital age: ICT integration and EFL student teachers’ teaching practices. Teaching English with Technology, 18(3), 18–32.

Purnomo, S., Mesin, P. T., Tamansiswa, U. S., Mesin, P. T., & Yogyakarta, U. N. (2018). TECHNOPRENEURSHIP DENGAN MODEL CLTSMK. 6(4).

Putra, B., Sulton, S., & Soepriyanto, Y. (2019). Pengembangan Screencast sebagai Electronic Performance Support System dalam Pemanfaatan Sipejar UM. JKTP: Jurnal Kajian Teknologi Pendidikan. https://doi.org/10.17977/um038v2i42019p252

Rabiman, R., Nurtanto, M., & Kholifah, N. (2020). Design and development E-learning system by learning management system (Lms) in vocational education. International Journal of Scientific and Technology Research.

Ratnawati, D., Martono, R., & Rabiman, R. (2020). Pengembangan E-Modul Sistem Rem untuk Siswa Sekolah Menengah Kejuruan. Jurnal Dinamika Vokasional Teknik Mesin, 5(1), 20–26. https://doi.org/10.21831/dinamika.v5i1.30987

Rohman, F., Fauzan, A., & Yohandri. (2020). Project, technology and active (PROTECTIVE) learning model to develop digital literacy skills in the 21st century. International Journal of Scientific and Technology Research, 9(1), 12–16.

Seo, K., Dodson, S., Harandi, N. M., Roberson, N., Fels, S., & Roll, I. (2021). Active learning with online video: The impact of learning context on engagement. Computers and Education. https://doi.org/10.1016/j.compedu.2021.104132

Sukarno, M. (2020). Penguatan Pendidikan Karakter dalam Era Masyarakat 5.0. Mempersiapkan Sumber Daya Manusia Untuk Menyongsong Era Society 5.0 : Pengembangan Kompetisi Dan Transformasi Pengukuran, 32–37.

Thiagarajan, V. (2020). Response to ‘Comment on “Analytical solution for transient, diffusing fields inside a ring conductor with rectangular cross section (IET SMT 2008 Vol. 2 No. 5)” by Gratkowski and Ziolkowski.’ In IET Science, Measurement and Technology. https://doi.org/10.1049/iet-smt.2019.0090

Zainul, R., Oktavia, B., & Putra, A. (2018). Pengenalan Dan Pengembangan E-Modul Bagi Guru- Guru Anggota MGMP Kimia Dan Biologi Kota Padang Panjang. 1(1), 1–9. https://doi.org/10.31227/osf.io/yhau2

Downloads

Published

12/31/2022

How to Cite

Purnomo, H., Suparmin, S., Setuju, S., Azizan, H. A. bin, & Alghozali, M. R. (2022). E-module development of lathe machinery engineering mechanical engineering expertise program. Jurnal Taman Vokasi, 10(2), 125–135. https://doi.org/10.30738/jtvok.v10i2.13585

Issue

Vol. 10 No. 2 (2022)

Section

Artikel

Citation Check

License

Copyright (c) 2022 Suparmin Suparmin, Setuju Setuju, Hero Purnomo, Hasnul Azwan Bin Azizan, Muh Rafiq Alghozali

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License(CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.