The Effect of Single and Double Blade on Archimedes Screw Turbine Performance
DOI:
https://doi.org/10.30738/jtvok.v11i1.14632Keywords:
Archimedes screw, Daya, EffisiensiAbstract
One of the parameters that affect turbine performance is the amount and shape of the turbine blades. This study aims to determine the effect of the amount of Archimedes screw turbine blades on turbine performance. The type of turbine used in this study is the Archimedes turbine with single and double screw balde. The turbine test was carried out in the Puri Kedaton river, Pematang Gajah village, with a flow rate entering the turbine of 0.043 m3/s. The shaft load received by the turbine is varied, namely 30 kg, 40 kg, 50 kg and the tilt of the turbine is installed 30°. The test results show that the double screw turbine type produces 518 Watt turbine power with the highest efficiency of 80,5%.
References
Amir. (2018). Kemiringan Optimum Model Turbin Ulir 2 Blade. Jurnal Teknik Mesin Universitas Muhammadiyah Tangerang, 2(1), 1–8.
Anwar, Z., Parsaroan, B. S., & Sunarso, E. (2021). Rancangan Bangun Turbin Mikrohidro Tipe Archimedes Screw Dengan Kapasitas Daya 560 Watt. Journal of Electrical Power Control and Automation (JEPCA), 4(1), 29. https://doi.org/10.33087/jepca.v4i1.43
Çengel, Y. A., & Cimbala, J. M. (2018). Fluid Mechanics Fundamentals and Applications (4th ed.).
Eva Kurnia Yulyawan, Indro Wicaksono, Indah Noor Dwi Kusuma Dewi, Ahlan, W. (2022). Pengaruh Jumlah Ulir Pada Prototipe Turbin Archimedes Screw Untuk Pembangkit Energi Hijau dan Terbarukan. 12(2), 9–16.
Hamdani, Tharo, Z., & Anisah, S. (2019). Perbandingan Performansi Pembangkit Listrik Tenaga Surya Antara Daerah Pegunungan Dengan Daerah Pesisir. Semnastek Uisu, 189–194.
Harja, H. B., Abdurrahim, H., Yoewono, S., & Riyanto, H. (2014). Penentuan Dimensi Sudu Turbin Dan Sudut Kemiringan Poros Turbin Pada Turbin Ulir Archimedes. 36(1), 26–33.
Irwanto. (2021). LINK AND MATCH PENDIDIKAN KEJURUAN DENGAN DUNIA USAHA DAN INDUSTRI DI INDONESIA. Paper Knowledge . Toward a Media History of Documents.
Kozyn, A., & David, W. (2017). A power loss model for Archimedes screw generators. Renewable Energy, 108, 260–273. https://doi.org/10.1016/j.renene.2017.02.062
Matalata, H. (2018). Listrik mikro hidro berdasarkan Potensi debit andalan sungai batanghari kota jambi. 1(1), 1–6.
Nugroho, A. B., & fathulloh, ST., M. (2019). Analisa perbandingan sifat mekanik material frp ( fiberglass reinforced plastics ) berbahan serat gelas woven roving dengan multiaxial. politeknik perkapalan negeri surabaya.
Nurdin, A., Magister, P., Mesin, J. T., Maret, U. S., Mesin, J. T., & Maret, U. S. (2018). Kajian Teoritis Uji Kerja Turbin Archimedes Screw Pada Head Rendah. 9(2), 783–796.
Piper, A. T., Rosewarne, P. J., Wright, R. M., & Kemp, P. S. (2020). The impact of an Archimedes screw hydropower turbine on fi sh migration in a lowland river. Ecological Engineering, 118(April 2018), 31–42. https://doi.org/10.1016/j.ecoleng.2018.04.009
Putra, I. G. W. (2018). View of Analisa Pengaruh Tekanan Air Terhadap Kinerja PLTMH dengan Menggunakan Turbin Archimedes Screw.pdf. 17(3).
Rorres, C. (2000). The Turn of the Screw : Optimal Design of an Archimedes Screw. Journal of Hydraulic Engineering ·, 72–80. https://doi.org/10.1061/(ASCE)0733-9429(2000)126
Setyono, G., & Ulum, M. (2018). Variasi Putaran Turbin terhadap Performa Pembangkit Listrik Tenaga Gelombang Air Menggunakan Oscillating Water Column ( Variation of Turbine Rotation on the Performance of a Water Wave Power Plant Using an Oscillating Water Column ). Jurnal Saintek, 15(2), 58–60. kopertis7.go.id/uploadjurnal/5_SaintekV15No2Des2018.pdf
Sistiawan, Y. A. T., & Gunoto, P. (2019). PERANCANGAN PEMBANGIT LISTRIK TENAGA HYBRIDE (TENAGA SURYA DAN TENAGA ANGIN) DENGAN KAPASITAS 20 W. SIGMA TEKNIKA. https://doi.org/10.33373/sigma.v2i1.1806
Sutopo, S., Setiadi, B. R., Nurtanto, M., Purnomo, S., Handoyono, N. A., & Johan, A. B. (2020). Enhancing of Student Collaboration in Thinking, Pairing, and Sharing on Energy Conversion Learning. International Journal of Higher Education. https://doi.org/10.5430/ijhe.v9n4p199
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Copyright (c) 2023 Zainuri Anwar, Ronaldo Siahaan, Dianna Ratnawati

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License(CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.